The CLC-1DIMFLV2EX-24V is a two-channel 0-10 Volt dimmer capable of controlling two independent, 24 Volt DC lighting loads in an EMerge Alliance® application. Perfect for use with the Armstrong® DC FlexZone™ ceiling grid,this module’s ultra-slim design allows it to be installed in the ceiling, either on or near the lighting fixture. Powered by infiNET EX®technology, the CLC device communicates wirelessly with the Crestron® control system, making it perfect for both new and retrofit applications. Additionally, the dimmer includes inputs for a photocell, occupancy sensor, and standard toggle or momentary switch.
EMerge Alliance Registered The CLC-1DIMFLV2EX-24V is 100% EMerge compatible, designed to flawlessly work within a 24Volts DC room-level power distribution system. The EMerge Alliance is a not-for-profit open industry association leading the rapid adoption of safe DC power distribution in commercial buildings through the development of EMerge Alliance standards.Crestron is a proud member and supporter of the Alliance.
Onboard Sensor Inputs Each module comes equipped with onboard inputs for use with photocells and occupancy sensors. This unique feature not only reduces wiring costs, it also eliminates the need for extra hardware.
Out-of-the-box Control via Standard Switch The CLC-1DIMFLV2EX-24Vuses either a momentary or a maintained switch to provide a closure, such as a standard lighting switch.A standard lighting switch, the kind carried in any hardware store, is a cost-effective solution for basic on and off functions. A momentary, pushbutton-type switch can be used when the application requires dimming the load. The momentary switch can be set up so that tapping the button turns the connected load on and off, while pressing and holding the button dims the load up or down.
Complete Crestron Control Because it's connected to the Crestron system, the CLC-1DIMFLV2EX-24V can also be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion EM® software for a complete solution to effectively manage energy.
Simple Setup Setup is simple, especially when using a connected maintained or a momentary switch. A specific series of button presses initiates the wireless device’s acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.
infiNET EX Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.
The CLC-1DIMFLV2EX-24V communicates with a Crestron® control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.
Compact 24VDC 2-channel 0-10Volt dimmer designed for EMerge Alliance® compliant applications
Two independently-controlled zone outputs
Onboard inputs for photocell and occupancy sensor
Crestron® control of any EMerge Alliance registered fixture
No special wiring-installs inline at the fixture
Maximum 2.5 Amp switched load capacity per channel
Reliable wireless communication using infiNET EX® technology
Local controls for testing and maintenance
Built-in support for control via standard momentary or maintained switch
Setup via on-board button or connected switch
Compatible with Armstrong® DC FlexZone™ grid
DC Voltage :
Product Weight :
Operating Temperature (Maximum) :
Operating Temperature (Minimum) :
24V: (2) Screw terminals for connecting to 24VDC rail via load device cable assembly;Terminals are non-polarized
+: (1) Screw terminal, provides +24VDC to power sensors
R: (1) Screw terminal, connects to remote switch
O: (1) Screw terminal,connects to occupancy sensor
For more information, refer to www.armstrong.com/dcflexzone.
Information regarding the EMerge Alliance can be found at www.emergealliance.org.
Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality.
Item(s) sold separately.
Load device cable assembly by others. Refer to www.emergealliance.org/products for more information.
Load Ratings :
Number of Channels: 2
Maximum Switched Load per Channel: 2.5 Amps at 24 Volts DC (60Watts)
Dim Load Types: 0-10Voltfluorescent ballast or LED driver (4-wire); 65mA max current sink per channel
Switch Load Types:24 Volts DC fluorescent ballast or LED driver
RF Transceiver: infiNET EX® 2-way RF,2.4 GHz ISM channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
30 m (100 ft) indoors, 55 m (175 ft) outdoors for device to device
45 m (150 ft) indoors, 75 m (250 ft) outdoors for device to gateway
All distances subject to site specific conditions
Gateway:Requires a CEN-RFGW-EX gateway or anMC3
Controls & Indicators :
Setup: (1) Miniature pushbutton, joins an infiNET EX network
Chan. 1: (1) Green LED, indicates load is switched on
Chan. 2: (1) Green LED, indicates load is switched on
Plastic; suitable for mounting in an environmental air-handling space