The ES-361U/LX-361U is a Time Code display featuring .56" yellow LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The 361U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats "1" or "A"). If the Time Zone option is ordered, an internal DIP switch is installed for this function. If receiving ESE Time Code from a timer, the unit will display Minutes & Seconds. The unit may be housed in one of three enclosures: the anodized aluminum/woodgrain case (ES-361U); the more rugged baked-powdercoat aluminum case (LX-361U) or a 19", one rack-high panel/chassis (ES-361UP).
Reads SMPTE/EBU, ASCII & ESE Time Code™
Automatic Code Detection
Four .56" Yellow LED Displays
Viewing Distance 20'
Switchable Between 12 & 24 Hour Format Display
Switchable to Date display (Month-Day)
Optional Time Zone Offset
Optional RS-232 ASCII output
NTP Option Available
UL & 220-240 VAC options available (110-120 VAC is standard)
Clear---Clear Anodized Front Panel
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
NTP---Client, NTP Clients synchronize with an NTP server.
P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
P2Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
Q---Console Mount: The unit is housed in an enclosure 8" deep, front panel is 3.5" x 9", 1/8" clear anodized aluminum.
T---Tenths of Seconds: Tenths of Seconds LED Display added.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.