The ES-562UE (12 hour)/ ES-564UE (24 hour) is a six digit Clock and a 100 Hour Up/Down Timer combined in one unit. The display and dual-function pushbutton controls are switchable between the Clock and Timer functions. The Clock and Timer are separate from each other and maintain their own memory. Dual-function Set/Stop, Select/Reset controls, along with Clock/Timer mode controls and Timer Up/Down momentary toggle switch are provided on the top of the case.
.56" Yellow LED Display
Independent Time-of-Day Clock and 24 Hour Up & Down Timer
Single Display Switchable between Clock and Timer
12 Hour (ES-562UE) or 24 Hour (ES-564UE) Clock
Optional ESE Time Code Output to Drive Remote Displays (Option ESE)
Optional Remote Control Input (Option R)
Optional 1.75" Rackmount Enclosure (Option P)
220-240 VAC (110-120 VAC is standard) & UL Options Available
C---Crystal Time Base: A crystal reference is employed for those applications requiring independence from the line frequency. A trimming function is included for greater accuracy (2-3 seconds/week).
Black---Black Anodized Front Panel.
D---Remote Control: This option consists of a connector wired to switches on a control plate via a six-foot cable. Extra cable available.
ESE---ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
N---Reverse Count at Zero: Changes count direction from Down to Up at Zero.
P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" black anodized Aluminum and chassis is 5" - 10" deep.
P2---Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
R---Remote Input: Rear-mounted connector for Remote Control.
RS---RS-232C Output: Computer Interface allows the time code data to be shared with a computer. RS-422A may be specified.
UL---UL Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.