The ES-941U is a Time Code display featuring 4.0 in. bright red LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (7 in. H x 19 in. W x 3.5 in. D). The unit accepts via the rear-mounted terminal block either ESE Time Code (TM) (TC76 or TC89 or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format 0 or 1 or A at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-941U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format or to display the Date instead of time-of-day (if incoming time code contains Date information such as ESE TC90 or date-encoded SMPTE/EBU or ASCII formats 1 or A). If the Time Zone option is ordered -- a rear-accessible DIP switch is installed for this function. If receiving ESE Time Code from a timer -- the unit will display Minutes & Seconds.
Wall Mount Display
Reads SMPTE/EBU, ASCII & ESE Time Code™
Automatic Code Detection
Four 4.0" Red LED Displays
Viewing Distance 120'
Switchable Between 12 & 24 Hour Format Display
Switchable to Date display
Optional Time Zone Offset
NTP Option Available
UL & 220-240 VAC options available (110-120 VAC is standard)
Amber---Amber LED Displays
Blue---Blue LED Displays
Green---Green LED Displays
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
NTP---Client, NTP Clients synchronize with an NTP server.
T---Tenths of Seconds: Tenths of Seconds LED Display added.
TZ---Time Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.