The ES-991U/LX-991U is a Time Code display featuring 2.3" amber LED displays. The unit accepts, via the rear-mounted BNC connector, either ESE Time Code (TC76, TC89, or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format "0", "1" or "A" at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-991U will automatically determine which code is being received. An internal DIP switch is used to configure the display for 12 or 24 Hour format, or to display the Date instead of time-of-day (if incoming time code contains Date information, such as ESE TC90, date-encoded SMPTE/EBU or ASCII formats "1" or "A"). If the Time Zone option is ordered, an internal DIP switch is installed for this function. If receiving ESE Time Code from a timer, the unit will display Minutes & Seconds. The unit may be housed in one of several enclosures: the black anodized aluminum/plastic case (ES-991U); the more rugged baked-powdercoat aluminum case (LX-991U); a 19" x 5.25" panel/chassis (ES-991UP) or a wall-mount case (ES-991U/Wall). (NOTE: The part number "991U" is equivalent to and supercedes the "369U")
Reads SMPTE/EBU, ASCII & ESE Time Code™
Automatic Code Detection
Four 2.3" Amber LED Displays
Viewing Distance 70'
Switchable Between 12 & 24 Hour Format Display
Switchable to Date display (Month-Day)
Optional Time Zone Offset
NTP Option Available
UL & 220-240 VAC options available (110-120 VAC is standard)
Black---Black Anodized Front Panel.
Blue---Blue LED Displays
Green---Green LED Displays
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
NTP---Client, NTP Clients synchronize with an NTP server.
P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
Red---Red LED Displays
TZ---Time Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.
Wall---Wall Mount Enclosure: Black powder-coated wall mount enclosure. Wall mount enclosure replaces standard housing.