Signal Routing / Switching : Routing and Matrix Switchers : Kramer - VSM-4x4X

4x4 Matrix Switcher, Videowall and Multiviewer

Model: VSM-4x4X

PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high quality scaling technology.
Matrix Switching Modes - Truly seamless switching mode (zero-time video cuts), or fade-through-black mode (enabling independent output resolutions).
Multiple Aspect Ratio Selections - Full, 4:3, 16:9 and best fit.
4 Preset Memory Locations - For each operation mode for quick access to common IN OUT configurations.
Non-Volatile Memory - Saves final settings.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Kramer's VSM 4x4X is a 4X4 seamless matrix switcher that can also be used as a video wall driver (2X2 or 1X4), a quad-viewer, or a 4 picture multi-viewer.

The unit allows instantaneous switching between inputs (that is, with a clean, frame-to-frame video cut). The VSM 4x4X supports HDMI 2.0 and HDCP 2.2, with resolutions up to 4K60 4:4:4, per-port HDCP and EDID settings, passing of 4 channels of embedded audio, and analog stereo de-embedded audio for each of the 4 outputs.

PixPerfect™ Scaling Technology - Kramer’s precision pixel mapping and high quality scaling technology.
Matrix Switching Modes - Truly seamless switching mode (zero-time video cuts), or fade-through-black mode (enabling independent output resolutions).
Multiple Aspect Ratio Selections - Full, 4:3, 16:9 and best fit.
4 Preset Memory Locations - For each operation mode for quick access to common IN OUT configurations.
Non-Volatile Memory - Saves final settings.
Built-in Noise Reduction and Picture Enhancement Features
HDMI Support - 4K at 60Hz, Deep Color, x.v.Color™, 7.1 PCM, Dolby TrueHD, DTS-HD, as specified in VHDMI 2.0.
Selectable Operation Modes - 4x4 matrix switcher, video wall (2x2 or 1x4 configuration), multi-view display Split, Side-by-Side, PIP, POP, Stacked or Quad display.
Bezel Correction Options - In video wall mode.
Constant Output Sync - For all modes of operation.
Built-in Video ProcAmp - Color, hue, sharpness, noise, contrast and brightness set individually for each input.
Firmware Upgrade - Ethernet based, via a user-friendly software upgrade tool.
Advanced EDID management per Input
Video inputs and Outputs - 4 HDMI Inputs and 4 Scaled HDMI Outputs
Audio Outputs - 4 balanced audio outputs with independent volume settings per output, embedded audio on the HDMI inputs and outputs.
Applications:
Presentation and multimedia
Projection systems in conference rooms, boardrooms, auditoriums, hotels, production studios, rental, and staging.
Any application where high quality conversion and switching of multiple and different video signals to graphical data signals is required for display or projection purposes

Matrix Switcher Video Input Type - HD/HDMI
Rackmountable - Yes
ROHS Compliant - Yes
Switcher Type - Audio
Switcher Type - Video
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Certifications: CE, UL, WEEE
Input Impedance: 150 ohm
Number of Inputs: 4
Number of Outputs: 4
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 6.42 in
Height: 1.70 in
Shipping Depth (with packaging): 2.80 in
Shipping Height (with packaging): 8.35 in
Shipping Width (with packaging): 13.82 in
Width: 8.45 in
Product Weight: 2.10 lbs
Shipping Weight: 3.20 lbs
Rack Units (Height): 1
Inputs: 1 HDMI: On a female HDMI connector
Outputs: 1 Fiber Optic: On 2 LC connectors, 1 Balanced Stereo Line Level: On a 5-pin terminal block connector
Ports: 1 RS-232: On a 3-pin terminal block for serial link extension, 1 100BaseT Ethernet: On an RJ-45 female connector for device control and LAN extension
Video: Max Bandwidth: 10.2Gbps (3.4Gbps per graphic channel), Max Resolution: 4K UHD @60Hz (4:2:0) 24bpp resolution, Compliance: HDMI 2.0 and HDCP 1.4
Controls: Front Panel: EDID SELECT and EDID READ buttons
Analog Audio: Max Vrms Level: 1, THD + NOISE: 0.03% at 1kHz at nominal level
Storage Temperature: -40° to +70°C (-40° to 158°F)
Humidity: 10% to 90%, RHL non-condensing
Enclosure: Size: Half 19 inch 1U, Type: Aluminum, Cooling: Convection Ventilation