Microphones : Boundary Microphones : Shure Incorporated - MX392BE/C

Cardioid Condenser Boundary Microphone with Bottom Exit Cable

Series: Shure

Model: MX392BE/C

Flat frequency response across the vocal range for uncolored sound
Interchangeable cartridges that provide a choice of polar pattern for each application
Sleek, low-profile design for surface mounting
Programmable mute button
LED indicator

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Microflex® MX300 Series microphones are surface-mounted electret condenser microphones designed primarily for mounting on conference tables, stage floors, and lecterns. Their high sensitivity and wide frequency range make them especially suitable for picking up speech and vocals in sound reinforcement and recording applications. Interchangeable cartridges provide the installer with greater flexibility and make it possible to easily reconfigure microphone coverage as the need arises.

Flat frequency response across the vocal range for uncolored sound
Interchangeable cartridges that provide a choice of polar pattern for each application
Sleek, low-profile design for surface mounting
Programmable mute button
LED indicator
Logic input/output for remote control or use with automatic mixers
RF filtering

Microphone Type - Electret Condenser
Polar/Pickup Pattern - Cardiod

Current Draw: 0 Amps
DC Voltage: 52 Volts
Impedance: EIA Rated at 150 ohms (180 ohms actual)
Operating Temperature (Maximum): 134.60 F
Operating Temperature (Minimum): -0.40 F
Cable Length: 12 ft
Maximum Frequency Response (Bandwidth): 17000 Hz
Maximum Frequency Response (Bandwidth): 17 kHz
Minimum Frequency Response (Bandwidth): 50 Hz
Minimum Frequency Response (Bandwidth): 0.05 kHz
Certifications: CE
Dynamic Range: 96 dB
Impedance: 180 ohm
Maximum SPL (Sound Pressure Level): 119 dB
Sensitivity: -30 dBV
Signal to Noise Ratio: 71 dB
Depth: 9.25 in
Height: 3.50 in
Shipping Depth (with packaging): 20.25 in
Shipping Height (with packaging): 10.31 in
Shipping Width (with packaging): 13 in
Width: 5 in
Product Weight: 0.64 lbs
Shipping Weight: 12.79 lbs
Output Configuration: Active Balanced
Common Mode Rejection: 45 dB minimum
Clipping Level (1% THD): -6 dBV (0.5 V)
Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Mute Switch Attenuation: -50 dB minimum
Cable: Attached cable with shielded audio pair and three conductors for logic control, unterminated, bottom exit
Relative Humidity: 0–95%
Power Requirements: 11–52 VDC phantom, 2.0 mA

Microphone 2625680 kb - Brochure

Project List

Microphone 1247736 kb - Instructions

Project List

Cardioid Condenser Boundary Microphone with Bottom Exit Cable

Series: Shure

Model: MX392BE/C

Audio-Video Corporation